AirborneVelocityMessage Properties |
The AirborneVelocityMessage type exposes the following members.
Name | Description | |
---|---|---|
![]() | Airspeed |
Gets or sets the aircraft's airspeed in knots.
|
![]() | AirspeedExceeded |
Gets or sets a value indicating that the aircraft's airspeed is higher than the maximum value that ADS-B messages can carry.
|
![]() | AirspeedIsTrueAirspeed |
Gets or sets a value indicating whether the Airspeed property indicates true airspeed or indicated airspeed.
|
![]() | ChangeOfIntent |
Gets or sets a value indicating that the Intent Change flag in a velocity message was set.
|
![]() | GeometricAltitudeDelta |
Gets or sets the difference between geometric and barometric altitude. Positive values indicate geometric altitude is above
barometric, negative values indicate geometric altitude is below barometric.
|
![]() | GeometricAltitudeDeltaExceeded |
Gets or sets a value indicating that the difference between the geometric and barometric altitude sources exceeds the maximum
value that ADS-B can convey.
|
![]() | Heading |
Gets or sets the aircraft's heading (not its ground track).
|
![]() | HorizontalVelocityError |
Gets or sets the margin for error for the horizontal velocity values.
|
![]() | VectorVelocity |
Gets or sets the velocity and bearing when expressed in an ADS-B message as a pair of speeds along the X/Y axes.
|
![]() | VelocityType |
Gets or sets the type of velocity encoded within the message, specifically whether it is airspeed or ground speed.
|
![]() | VerticalRate |
Gets or sets the vertical rate in feet per minute. Positive values indicate that the vehicle is ascending, negative values
indicate the vehicle is descending.
|
![]() | VerticalRateExceeded |
Gets or sets a value indicating that the vertical rate exceeds the highest value that the ADS-B message can convey.
|
![]() | VerticalRateIsBarometric |
Gets or sets a value indicating that the source for the vertical rate is barometric as opposed to geometric.
|